Anti Finger Coating
Anti finger Coating Line
Without this coating, fingerprints are easily imprinted on the surface of an object and are very difficult to remove, causing poor appearance and negatively affecting durability.
Valgro Anti finger Coating Line
Anti-fingerprint coating are always applied after other processes. such hairline, satin, mirror, vibration, bead blasted and coloring, which make sure the sheet cleaning, shining and color consistence without any fingerprint stains. It is a nice choice no matter for interior or exterior building decoration, especially some public area which people can reach and touch a lot.
Our Anti-Smudge coating creates a protective layer on the surface of an object to prevent the effects fingerprint oils and dirt.
Valgro Anti Finger Coating Line
If you are looking for any methods to make SURFACE look better, last longer and yet required not much effort to maintain, without getting impact on environment, efforts, time & resources.
We, at Valgro, striving and working on proper treatment for Surfaces NOT ONLY look good when new but renew the old surface and maintain the new surface quality for longer lasting. We are in effort to generate the world's most suitable surface protective products with innovative materials, ease and safe to use, deliver long term Cosmetic and Performance of the surfaces.
STAYKLEAN XS-05 is translucent water based single
component and multipurpose coating liquid to give crystal clear
non-yellowing coating over most surfaces to protect the surface
from getting stain.
The uniquely blended STAYKLEAN XS-05 prevents tarnish, water stains for both oxide/tarnish and scale/deposit as well as finger print over metals surface too. The physical properties and chemical resistance of the crystal clear thin film form strong bonds integrated with the surfaces, providing long-term protection. The non-yellowing film formed will suit the outdoor surfaces too.
- STAYKLEAN XS-05 is ready to use. It is spray-able, paintable over contour surface or wipe-able over flat surface properly cleaned, degreased, dried without dust, grease, oil and tarnish-free neutralized surfaces.
- Coating layer is readily dried to touch at room temperature within 15 minutes. Hot air blower or drying in oven at 50oC for few minutes can be applied for faster drying, but matured coat properties achievable after leaving to cure further at room temperature for 48hrs.
Lotus leave surface
Valgro-Chartermate introduce water repellent protective clear coat, our NeoNano series, the hydrophobic coating will repel the moisture/water by forming water bead over the surface that can be rolled out with the contaminant, it has similar quality as of Natural lotus leave surface that can roll out water droplets.
Acid resistance and alkaline resistance
Water and Humidity (Moisture) are the main reasons for the surface to be Deteriorated, Dust Deposit, lime Scale Staining, Rotting, Wearing, Corroding, Rusting, Oxidizing, look ugly as of algae, fungus and mosses growth over it. This will lead to not only cosmetically unwanted surface but also underperformed surfaces for what it has been designed for. To prevent such condition,
Our Anti-fingerprint coating also provides corrosion, acid and alkalineresistant because it contains no chromium in its composition.
In additional, it does not contain any acid or alkaline solutions, so it is environmentally friendly.
Anti finger : No finger
Generally, the nature of our NeoNano series specific coating is nano level protection against water/moisture. Such coating is extremely thin, the thickness of only submicron level is sufficient for get protected the surface required, by remaining original tactual feeling without any sensible layer as well as without any distortion of optical look of the surface processed, invisible to naked eyes.
Conventional water repellent coating is thick deposit film
act as there are physical coat rather, in the same way as of
varnish film over the surface which may not give the haptic
feeling of original surface materials that been coated over
and may distort the optic look of the original surface
materials to be either matte or shiny or even discolored.
With thorough and extensive test, we are now introducing nano-engineered surface protective coating materials. Our Stayklean and Neonano series providing stain resist surface easy to wipe away finger-print that ease the surfaces to remain new both functionally and cosmetically.
Easy to clean
Any dirt or smudges that do get left on the surface are very easy to remove with a simple surface cleaning.
- STAYKLEAN XS-05 is translucent water based single component and multipurpose coating liquid to give crystal clear nonyellowing coating over most surfaces to protect the surface from getting stain.
- The uniquely blended STAYKLEAN XS-05 prevents tarnish, water stains for both oxide/tarnish and scale/deposit as well as finger print over metals surface too.
- The physical properties and chemical resistance of the crystal clear thin film form strong bonds integrated with the surfaces, providing long-term protection.
- The non-yellowing film formed will suit the outdoor surfaces too.
Auto revolving door
wall decoration plate
advertising name plate
ceiling and cabinets