Strip & Coil Grinding/Polishing Machine (Wet / Dry Type) uses Grinding Oil or Emulsion as a Media to achieve a fine and shiny grinding effect on either hot or cold rolled stainless steel sheets or coils.
The Machine is designed to get Finishing No.3 (Coarse Finishing, Abrasive Grain From G60 to G150 ) or No.4 (Fine Finishing, Most Popular, abrasive grain from G180 Or above) and HL Finishing (Hairline Finishing, Characterized by Smooth and long line ).
Coil to Coil Polishing starts with a 2-roller Grinding Unit, after being stretched tightly with their respective tension rollers on the top, Abrasive belts will be spinning in a high speed in grinding or removing the surface to get the desired finishing effect of No.3 or No.4. With The help of the Oil Nozzle in the inlet and outlet, the finishing will have an oily and fine result.
A 4-roller Grinding Unit is in the behind for option. Working in a similar module, the belts are now spinning in a low speed to draw out the long line effect that cannot be done by high-speed spinning belts but is favored by many.
Model "Fabrika" | DB 50-1HD | DB 62-1HD | SP 50 -4 HD | SP 62-4 HD | SP 50 -6 HD | SP 62-6 HD | ||
---|---|---|---|---|---|---|---|---|
Head Type | Roller Brush | Roller Brush | Roller Brush | Roller Brush | Roller Brush | Roller Brush | ||
Work Surface | Top Side | Top Side | Top Side | Top Side | Top Side | Top Side | ||
Work Head | 1 | 1 | 4 | 4 | 6 | 6 | ||
Process: Wet / Dry | Wet / Dry | Wet / Dry | Wet / Dry | Wet / Dry | Wet / Dry | Wet / Dry | ||
Application | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | ||
Finish Achieved | Brush # 4 | Brush # 4 | Brush # 4 | Brush # 4 | Brush # 4 + Satin | Brush # 4 + Satin | ||
Type of Material | Stainless Steel / Aluminum/Brass / Copper | |||||||
Min. Max Width | 1000 - 1250 | 1000-1550 | 1000 - 1250 | 1000 - 1550 | 1000 - 1250 | 1000 - 1550 | ||
Min. Length | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | ||
Min. Max Thickness | 0.8 to 3 | 0.8 to 3 | 0.8 to 3 | 0.8 to 3 | 0.8 to 3 | 0.8 to 3 | ||
Brush Diameter | 350 / 400 | 350 / 400 | 350 / 400 | 350 / 400 | 350 / 400 | 350 / 400 | ||
Brush Action | R + O | R + O | R + O | R + O | R + O | R + O | ||
Conveyor Type R= Roller / B = Belt | Roller | Roller | Roller | Roller | Roller | Roller | ||
Conveyor speed Min / Max - MPM | 0.5 - 10 | 0.5 - 10 | 0.5 - 10 | 0.5 - 10 | 0.5 - 10 | 0.5 - 10 | ||
Dust Extraction Model No | DCS-5 | DCS-5 | DCS-10 | DCS-10 | DCS-10 | DCS-10 | ||
Electrical parameters | The integrated frequency converter allows the machine to work worldwide with all power supply systems and enables smooth start and enhanced motor protection. |
The highest possible degree of surface finish is usually desirable, for two quite distinct reasons.