SAMARTH – Side edge Deburring and Finishing machine is designed to remove micro metal burr formations after cutting processes like shearing, punching, etc. It especially works on the metal side and edges deburring for removing burrs created from sheet external perimeter. This deburring is required in some cases for aesthetic reasons, while some industrial units utilize it to round the edges for safety reasons.
Valgro India offer flat sheet / Flat bar side grinding machine. Made for stainless steel bars and plates side polishing and deburring on this video it is demonstrated side grinding with 100mm width 10mm thick Flat sheet.
| Model | Edge 9 | Edge 11 | Edge 21 |
|---|---|---|---|
| Head Type | Wheel / Disc | Wheel / Disc | Wheel / Disc |
| Work Surface | Wall / Edge | Wall / Edge | Wall / Edge |
| Work Head | 1 | 2 | 2 |
| Process: Wet / Dry | Dry | Dry | Dry |
| Application | Burr Removal | Micro Joint + Edge Burr Removal | |
| Finish Achieved | Smooth edge | Smooth edge | Smooth edge |
| Type of Material | Sheet Metal | Smooth edge | Smooth edge |
| Min. Max Width | 300 | 600 | 600 |
| Min. Length | 100 | 300 | 300 |
| Min. Max Thickness | 0.8 to 3mm | 0.8 to 3mm | 0.8 to 3mm |
| Brush Diameter | 150mm | 150mm | 150mm |
| Brush Action R = Rotate / O = Oscillate | R | R | R |
| Conveyor Type R= Roller / B = Belt | Manual | Belt / Roller | Belt |
| Conveyor speed Min / Max - MPM | Manual Feed | 0.5 - 10 | 0.5 - 10 |
| Dust Extraction : Valgro-Duklean | DCS-1 | DCS-3 | DCS-5 |
| Electrical parameters | The integrated frequency converter allows the machine to work worldwide with all power supply systems and enables smooth start and enhanced motor protection. All Dimensions in MM |
||
We have a wide range of deburring and Finishing machines for sheet metal processing with One roof Solution.
